APL Apollo Hollow Section come in a wide product range. However, beyond the standard requirements of the industry, the production units are equipped to customise and deliver any special requirement in terms of sizes, quantity or surface finish as per the need of its customers. (Subject to minimum order quantity)
Size: 20mm x 20mm to 300mm x 300mm
Thickness: 1mm to 12mm
Length: 4 metre to 12 metre
Rectangular Hollow Section (RHS)
Size: 20 mm x 40 mm to 200 mm x 400 mm
Thickness: 1 mm to 12 mm
Length: 4 metre to 12 metre
Surface Protection
APL Apollo Hollow Sections are available in following Surface Finish:
1. Black (Self Coloured Uncoated)
2. Varnished / Oil Coated
3. Galvanised
4. Pre-Galvanised
Production Standard
1. UNI EN 10219-2
2. DIN EN 10219
3. DIN EN 10305-5
4. IS-4923
Material Grade
1. YST 210
2. YST 240
3. YST 310
4. YST 355
Customised Sizes
– Now order in any size (within mill capacity subject to minimum order quantity)
– No more compromise on size
– Wide range of product basket
Possibility 1:
To build an equipment a customer might require the product in different sizes With the use of DFT the customer’s need can be fulfilled.
For example:
• 300 mm x 300 mm x 6 mm to 12 mm
• 110 mmx 110 mmx 5 mm
• 90 mm x 90 mm x 4 mm
• 60 mm x 30 mm x 2 mm
• 51 mm x 51 mm x 2 mm
Possibility 2:
For a project a customer might require various range of product sizes. With the use of DFT this need of the customer can be fulfilled.
For example:
• 400 mm x 200 mm x 6 mm to 12 mm
• 280 mm x 280 mm x 6 mm to 12 mm
• 160 mm x 100 mm x 4 mm
• 154 mm x 106 mm x 4 mm
• 120 mm x 60 mm x 6 mm